PEN FILM (polyethylene naphtalate)
As base film we use a biaxially oriented, temperature resistant polyethylene naphtalate film.
Due to its good mechanical, thermal and electrical properties, this film - which is similar to polyester - is especially suitable for applications in extreme environments. The main properties of polyester film are surpassed by PEN.
This film is metallized with pure aluminum (99.98 %).
The electric resistance (metallization strength) and the kind of metallization will be according to the customer's requirements.
Here are our standard kinds of metallization available:
One side metallization with margin right / left
One side metallization with heavy edge type BLEND and margin right / left
Internal 2-section series with one side metallization
Internal 2-section series with one side metallization and heavy edge type BLEND
Other designs like internal series, double side metallization, tapered and segment metallization and many others on request.
Type designations PEN PN …
| PNPL | Plain-Film (non-Metallized) |
| PNMA | Aluminum Metallized |
| PNMAD | Aluminum Metallized double side |
| PNMAR | Aluminum Metallized with Heavy Edge |
| Nominal thickness (μm) | Typ Q72: 1.4 / 2.0 / 3.0 / 4.0 / 6.0 Typ Q71: 6.0 / 8.0 / 10.0 / 12.0 |
| Slitting width | ≥ 2.25 mm |
| Free margin | ≥ 0.25 mm |
| Inside core diameter | 75 mm |
| Roll outside diameter | 155 mm / 165 mm / 180 mm / 200 mm |
| Typical properties | high thermal stability and moisture resistance. low shrinkage under thermal stress. highest mechanical strength |
